合金の一覧
卑金属合金
アルミニウム
- AA-8000: AA-1350の代わりとして、米国電気コードに準拠したアメリカの電気建築用ワイヤ[1]
- Al–Li(2.45%リチウム): スペースシャトルなどの航空宇宙の用途
- アルニコ(ニッケル、コバルト): 永久磁石
- ジュラルミン(銅)
- マグナリウム(5-50%マグネシウム): 航空機のボディ、はしご、花火など
- アルミニウム・スカンジウム(スカンジウム)
- Y合金 (4%銅、ニッケル、マグネシウム)
アルミニウムはβ–Al–Mgのように複雑金属合金を形成する
銅
ガリウム
- Al Ga (アルミニウム、ガリウム)
- Galfenol(鉄)
- ガリンスタン(インジウム、錫)
鉄
- フェロアロイ
- Ferroboron
- Ferrocerium
- Ferrochrome
- Ferromagnesium
- Ferromanganese
- Ferromolybdenum
- Ferronickel
- Ferrophosphorus
- Ferrosilicon
- Ferrotitanium
- Ferrouranium
- Ferrovanadium
- インバー/不変鋼(ニッケル)
- 鋳鉄 (炭素)
- 銑鉄 (炭素)
- 水素化鉄(II) (水素)
- コバール(ニッケル、コバルト)
- 鋼/鋼鉄(炭素)
マンガン
- M2052制振合金 Mn73、Cu20、Ni5、Fe2(原子重量%) からなり、高い制振性能を持つマンガン合金
水銀
- アマルガム
- Ashtadhatu
ニッケル
- アルニコ(アルミニウム、コバルト); 磁石に使われる
- Alumel (マンガン、アルミニウム、ケイ素)
- Brightray (20%クロム、鉄、レアアース)元々硬質のバルブシートに使われた
- Chromel (クロム)
- 白銅(青銅、銅)
- フェロニッケル (鉄)
- 洋白/洋銀/ニッケルシルバー/ジャーマンシルバー (銅、亜鉛)
- Hastelloy (モリブデン、クロム、時々タングステン)
- Inconel(クロム、鉄)
- Monel metal (銅、鉄、マンガン)
- ニクロム(クロム)
- Nickel-carbon (炭素)
- Nimonic (クロム、コバルト、チタン)ジェットエンジンのタービンブレードに使われる
- Nisil (ケイ素)
- Nitinol (チタン、形状記憶合金)
- 磁気的に「ソフトな」合金
プルトニウム
- プルトニウムアルミニウム
- プルトニウムセリウム
- プルトニウムセリウムコバルト
- プルトニウムガリウム(ガリウム)
- プルトニウムガリウムコバルト
- プルトニウムジルコニウム
ロジウム
- 偽パラジウム(ロジウム-銀合金)
スカンジウム
- 水素化スカンジウム(水素)
銀
チタン
錫
脚注
注釈
- The purity of gold alloys is expressed in karats, (UK: carats) which indicates the ratio of the minimum amount of gold (by mass) over 24 parts total. 24 karat gold is fine gold (24/24 parts), and the engineering standard is that it be applied to alloys that have been refined to 99.9% or better purity ("3 nines fine"). There are, however, places in the world that allow the claim of 24kt. to alloys with as little as 99.0% gold ("2 nines fine" or "point nine-nine fine). An alloy which is 14 parts gold to 10 parts alloy is 14 karat gold, 18 parts gold to 6 parts alloy is 18 karat, etc. This is becoming more commonly and more precisely expressed as a decimal fraction, i.e.: 14/24 equals .585 (rounded off), and 18/24 is .750 ("seven-fifty fine"). There are hundreds of possible alloys and mixtures possible, but in general the addition of silver will color gold green, and the addition of copper will color it red. A mix of around 50/50 copper and silver gives the range of yellow gold alloys the public is accustomed to seeing in the marketplace.
出典
- Hunter, Christel (2006). Aluminum Building Wire Installation and Terminations, IAEI News, January–February 2006. Richardson, TX: International Association of Electrical Inspectors.
- “Tin Based Alloys”. Mayer Alloys. 2014年9月10日時点のオリジナルよりアーカイブ。
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.